armi.reactor.parameters package

The parameters hold state info for everything in ARMI’s composites structure.

Example Parameters

Object

Parameters

Reactor

Reactor Parameters

Assembly

Assembly Parameters

Block

Block Parameters

Component

Component Parameters

Basic Usage

Given an ARMI reactor model object such as r, one may set or get a parameter just like any other instance attribute on r.p:

>>> r.p.cycleLength
350.0

Alternatively, dictionary-like access is supported:

>>> r.p["cycleLength"]
350.0

Note

The data themselves are stored in special hidden fields, which are typically accessed through the Parameter definition that describes them. The name for such a parameter field looks like "_p_" + paramName. For example, to get cycleLength one could do:

>>> r.core.p._p_cycleLength
350.0

However, it is not recommended to access parameters in this way, as it circumvents the setters and getters that may have been implemented for a given parameter. One should always use the style from the first two examples to access parameter values.

Furthermore, ParameterCollection classes have some extra controls to make sure that someone doesn’t try to set random extra attributes on them. Only parameters that were defined before a particular ParameterCollection class is instantiated may be accessed.The rationale behind this is documented in the Design Considerations section below.

Most parameters in ARMI are block parameters. These include flux, power, temperatures, number densities, etc. Parameters can be any basic type (float, int, str), or an array of any such types. The type within a given array should be homogeneous. Examples:

>>> b.p.flux = 2.5e13
>>> b.p.fuelTemp = numpy.array(range(217), dtype=float)
>>> b.p.fuelTemp[58] = 600

Note

There have been many discussions on what the specific name of this module/system should be. After great deliberation, the definition of parameter seemed very suitable:

One of a set of measurable factors, such as temperature and pressure, that define a system and determine its behavior and are varied in an experiment ~ thefreedictionary

any of a set of physical properties whose values determine the characteristics or behavior of something <parameters of the atmosphere such as temperature, pressure, and density> ~ Meriam-Webster

The parameters system is composed of several classes:

Parameter :

These store metadata about each parameter including the name, description, its units, etc. Parameters also define some behaviors such as setters/getters, and what to do when retrieving a value that has not been set, and whether or not to store the parameter in the database. The parameterDefinitions.Parameter object implement the Python descriptor protocol (the magic behind @property), and are stored on corresponding parameterCollections.ParameterCollection classes to access their underlying values.

ParameterDefinitionCollection :

As the name suggests, these represent a collection of parameter definitions. Each ParameterCollection gets a ParameterDefinitionCollection, and there are also module-global collections, such as ALL_DEFINITIONS (containing all defined parameters over all ArmiObject classes), and others which break parameters down by their categories, associated composite types, etc.

ParameterBuilder :

These are used to aid in the creation of Parameter instances, and store default arguments to the Parameter constructor.

ParameterCollection :

These are used to store parameter values for a specific instance of an item in the ARMI composite structure, and have features for accessing those parameters and their definitions. The actual parameter values are stored in secret “_p_”+paramName fields, and accessed through the Parameter definition, which functions as a descriptor. Parameter definitions are stored as class attributes so that they can be shared amongst instances. All parameter fields are filled with an initial value in their __init__() to benefit from the split-key dictionaries introduced in PEP-412. This and protections to prevent setting any other attributes form a sort of “__slots__ lite”.

ResolveParametersMeta :

This metaclass is used by the base ArmiObject class to aid in the creation of a hierarchy of ParameterCollection classes that appropriately represent a specific ArmiObject subclass’s parameters. In short, it looks at the class attributes of an ArmiObject subclass to see if there is a pDefs attribute (which should be an instance of ParameterDefinitionCollection). If the pDefs attribute exists, the class will get its own ParameterCollection class, which will itself be a subclass of the parameter collection class associated with the most immediate ancestor that also had its own pDefs. If an ArmiObject subclass has not pDefs attribute of its own, it will simply be associated with the parameter collection class of its parent.

This rather roundabout approach is used to address many of the design considerations laid out below. Namely that pains be taken to minimize memory consumption, properties be used to control data access, and that it be relatively difficult to introduce programming errors related to improperly-defined or colliding parameters.

Design Considerations

Design considerations

Issue

Resolution/Consequences

Metadata about parameters is necessary for determining whether a parameter should be stored in the database, and to allow the user to toggle this switch.

Parameters must uniquely named within a Composite subclass.

Also, we need to have Parameter classes to store this metadata.

There should not be any naming restrictions between different Composite subclasses.

Parameters must be defined or associated with a specific ParameterCollection subclass.

PyLint cannot find programming errors related to incorrect strings.

We would like to use methods/functions for controlling state information.

This also eliminated the possibility of using resource files to define the properties, otherwise we would be mapping names between some resource file and the associated parameter/property definition.

Creating getters and setters for every parameter would be overwhelming and unsustainable.

We will use Python descriptors, which have most of the functionality used in getters and setters.

ParameterCollection knows how to generate descriptors for itself, based on a ParameterDefinitionCollection.

The majority of memory consumption occurs in parameters, strings and dictionaries. Minimizing the storage requirements of the parameters is desirable.

Python __slots__ are a language feature which eliminates the need for each class instance to have a __dict__. This saves memory when there are many instances of a class. Slot access can sometimes be faster as well.

In the past, __slots__ were used to store parameter values. This became rather onerous when we wanted to support parameter definitions from plugins. We now use the traditional __dict__, but take pains to make sure that we can get the memory savings from the key-sharing dicts provided by PEP-412. Namely, all attributes from the parameter definitions and other state are initialized to __something__ within the __init__() routine.

Parameters are just fancy properties with meta data.

Implementing the descriptor interface on a Parameter removes the need to construct a Parameter without a name, then come back through with the applyParameters() method to apply the Parameter as a descriptor.
armi.reactor.parameters.reset()[source]

Reset the status of all parameter definintions.

This may become necessary when the state of the global parameter definitions becomes invalid. Typically this happens when running multiple cases for the same import of this module, e.g. in unit tests. In this case things like the assigned flags will persist across test cases, leading to strange and incorrect behavior.

Submodules