# Copyright 2019 TerraPower, LLC
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
"""
COMPXS is a binary file that contains multigroup macroscopic cross sections for homogenized
regions in a full core. The file format can be found in [DIF3D]_.
.. [DIF3D] Derstine, K. L. DIF3D: A Code to Solve One-, Two-, and
Three-Dimensional Finite-Difference Diffusion Theory Problems,
report, April 1984; Argonne, Illinois.
(https://digital.library.unt.edu/ark:/67531/metadc283553/:
accessed October 17, 2019), University of North Texas Libraries,
Digital Library, https://digital.library.unt.edu; crediting UNT
Libraries Government Documents Department.
The file structure is listed here ::
RECORD TYPE PRESENT IF
=================================== ==========
SPECIFICATIONS ALWAYS
COMPOSITION INDEPENDENT DATA ALWAYS
********* (REPEAT FOR ALL COMPOSITIONS)
* COMPOSITION SPECIFICATIONS ALWAYS
* ****** (REPEAT FOR ALL ENERGY GROUPS
* * IN THE ORDER OF DECREASING
* * ENERGY)
* * COMPOSITION MACROSCOPIC GROUP ALWAYS
* * CROSS SECTIONS
*********
POWER CONVERSION FACTORS ALWAYS
See Also
--------
:py:mod:`armi.nuclearDataIO.cccc.isotxs`
Examples
--------
::
>>> from armi.nuclearDataIO import compxs
>>> lib = compxs.readBinary('COMPXS')
>>> r0 = lib.regions[0]
>>> r0.macros.fission
# returns fission XS for this region
>>> r0.macros.higherOrderScatter[1]
# returns P1 scattering matrix
>>> r0.macros.higherOrderScatter[5] *= 0 # zero out P5 scattering matrix
>>> compxs.writeBinary(lib, 'COMPXS2')
Notes
-----
Power conversion factors are used by some codes to determine how to scale the flux
in a region to a desired power based on either fissions/watt-second or
captures/watt-second. If the user does not plan on using these values, the COMPXS
format indicates the values should be set to ``-1E+20``.
The value of ``powerConvMult`` "times the group J integrated flux for the regions
containing the current composition yields the total power in those regions and
energy group J due to fissions and non-fission absorptions."
The ``d<1,2,3>Multiplier`` values are the first, second, and third dimension
directional diffusion coefficient multipliers, respectively. Similary, the ``d<1,2,3>Additive``
values are the first, second, and third dimension directional diffusion coefficient
additive terms, respectively.
"""
from traceback import format_exc
from scipy.sparse import csc_matrix
import numpy
from armi import runLog
from armi.nuclearDataIO import cccc
from armi.utils.properties import unlockImmutableProperties, lockImmutableProperties
from armi.nuclearDataIO.xsCollections import XSCollection
from armi.nuclearDataIO.nuclearFileMetadata import (
RegionXSMetadata,
COMPXS_POWER_CONVERSION_FACTORS,
REGIONXS_POWER_CONVERT_DIRECTIONAL_DIFF,
)
def _getRegionIO():
return _CompxsRegionIO
def _flattenScatteringVector(colVector, group, numUpScatter, numDownScatter):
flatVector = (
colVector[group - numDownScatter : group + numUpScatter + 1].toarray().flatten()
)
return list(reversed(flatVector))
[docs]def compare(lib1, lib2, tolerance=0.0, verbose=False):
"""
Compare two COMPXS libraries and return True if equal, or False if not equal.
Parameters
----------
lib1: XSLibrary
first library
lib2: XSLibrary
second library
tolerance: float
Disregard errors that are less than tolerance.
verbose: bool
show the macroscopic cross sections that are not equal
Returns
-------
equals: bool
True if libraries are equal, else false
"""
from armi.nuclearDataIO.xsLibraries import compareLibraryNeutronEnergies
equals = True
equals &= compareLibraryNeutronEnergies(lib1, lib2, tolerance)
equals &= lib1.compxsMetadata.compare(lib2.compxsMetadata, lib1, lib2, tolerance)
for regionName in set(lib1.regionLabels + lib2.regionLabels):
region1 = lib1[regionName]
region2 = lib2[regionName]
if region1 is None or region2 is None:
warning = "Region {} is not in library {} and cannot be compared"
if region1:
runLog.warning(warning.format(region1, 2))
if region2:
runLog.warning(warning.format(region2, 1))
equals = False
continue
equals &= _compareRegionXS(region1, region2, tolerance, verbose)
return equals
def _compareRegionXS(region1, region2, tolerance, verbose):
"""Compare the macroscopic cross sections between two homogenized regions."""
return region1.macros.compare(region2.macros, None, tolerance, verbose)
class _CompxsIO(cccc.Stream):
"""Semi-abstract stream used for reading to/writing from a COMPXS file.
Parameters
----------
fileName: str
path to compxs file
lib: armi.nuclearDataIO.xsLibrary.CompxsLibrary
Compxs library that is being written to or read from `fileName`
fileMode: str
string indicating if ``fileName`` is being read or written, and
in ascii or binary format
getRegionFunc: function
function that returns a :py:class:`CompxsRegion` object given the name of
the region.
See Also
--------
armi.nuclearDataIO.cccc.isotxs._IsotxsIO
"""
_METADATA_TAGS = (
"numComps",
"numGroups",
"fileWideChiFlag",
"numFissComps",
"maxUpScatterGroups",
"maxDownScatterGroups",
"numDelayedFam",
"maxScatteringOrder",
)
def __init__(self, fileName, lib, fileMode, getRegionFunc):
cccc.Stream.__init__(self, fileName, fileMode)
self._lib = lib
self._metadata = self._getFileMetadata()
self._metadata.fileNames.append(fileName)
self._getRegion = getRegionFunc
self._isReading = "r" in self._fileMode
def _getFileMetadata(self):
return self._lib.compxsMetadata
def isReadingCompxs(self):
return self._isReading
def fileMode(self):
return self._fileMode
@classmethod
def _read(cls, fileName, fileMode):
from armi.nuclearDataIO.xsLibraries import CompxsLibrary
lib = CompxsLibrary()
return cls._readWrite(
lib,
fileName,
fileMode,
lambda containerKey: CompxsRegion(lib, containerKey),
)
@classmethod
def _write(cls, lib, fileName, fileMode):
return cls._readWrite(
lib, fileName, fileMode, lambda containerKey: lib[containerKey]
)
@classmethod
def _readWrite(cls, lib, fileName, fileMode, getRegionFunc):
with _CompxsIO(fileName, lib, fileMode, getRegionFunc) as rw:
rw.readWrite()
return lib
def readWrite(self):
"""
Read from or write to the COMPXS file.
See Also
--------
armi.nuclearDataIO.cccc.isotxs._IsotxsIO.readWrite : reading/writing ISOTXS files
"""
runLog.info(
"{} macroscopic cross library {}".format(
"Reading" if self._isReading else "Writing", self
)
)
unlockImmutableProperties(self._lib)
try:
regNames = self._rw1DRecord(self._lib.regionLabels)
self._rw2DRecord()
for regLabel in regNames:
region = self._getRegion(regLabel)
regionIO = _getRegionIO()(region, self, self._lib)
regionIO.rwRegionData()
self._rw5DRecord()
except:
raise OSError(
"Failed to {} {} \n\n\n{}".format(
"read" if self._isReading else "write", self, format_exc()
)
)
finally:
lockImmutableProperties(self._lib)
def _rw1DRecord(self, regNames):
"""Write the specifications block."""
with self.createRecord() as record:
for datum in self._METADATA_TAGS:
self._metadata[datum] = record.rwInt(self._metadata[datum])
self._metadata["reservedFlag1"] = record.rwInt(
self._metadata["reservedFlag1"]
)
self._metadata["reservedFlag2"] = record.rwInt(
self._metadata["reservedFlag2"]
)
regNames = list(range(self._metadata["numComps"]))
return regNames
def _rw2DRecord(self):
"""Write the composition independent data block."""
with self.createRecord() as record:
if self._metadata["fileWideChiFlag"]:
self._metadata["fileWideChi"] = record.rwMatrix(
self._metadata["fileWideChi"],
(self._metadata["fileWideChiFlag"], self._metadata["numGroups"]),
)
self._rwLibraryEnergies(record)
self._metadata["minimumNeutronEnergy"] = record.rwDouble(
self._metadata["minimumNeutronEnergy"]
)
self._rwDelayedProperties(record, self._metadata["numDelayedFam"])
def _rwLibraryEnergies(self, record):
self._lib.neutronVelocity = record.rwList(
self._lib.neutronVelocity, "double", self._metadata["numGroups"]
)
self._lib.neutronEnergyUpperBounds = record.rwList(
self._lib.neutronEnergyUpperBounds, "double", self._metadata["numGroups"]
)
def _rwDelayedProperties(self, record, numDelayedFam):
if numDelayedFam:
self._metadata["delayedChi"] = record.rwMatrix(
self._metadata["delayedChi"],
(self._metadata["numGroups"], numDelayedFam),
)
self._metadata["delayedDecayConstant"] = record.rwList(
self._metadata["delayedDecayConstant"], "double", numDelayedFam
)
self._metadata["compFamiliesWithPrecursors"] = record.rwList(
self._metadata["compFamiliesWithPrecursors"],
"int",
self._metadata["numComps"],
)
def _rw5DRecord(self):
"""Write power conversion factors"""
numComps = self._getFileMetadata()["numComps"]
with self.createRecord() as record:
for factor in COMPXS_POWER_CONVERSION_FACTORS:
self._getFileMetadata()[factor] = record.rwList(
self._getFileMetadata()[factor], "double", numComps
)
readBinary = _CompxsIO.readBinary # pylint: disable=invalid-name
readAscii = _CompxsIO.readAscii # pylint: disable=invalid-name
writeBinary = _CompxsIO.writeBinary # pylint: disable=invalid-name
writeAscii = _CompxsIO.writeAscii # pylint: disable=invalid-name
class _CompxsRegionIO:
"""
Specific object assigned a single region to read/write composition information.
Used with _COMPXS object to read/write 3D and 4D records -
composition specifications and compsosition macroscopic cross sections.
Cross sections are read/written in order of decreasing energy.
This differs from the _COMPXS object, as this object acts on a single region, but
uses the file mode and file path from the _COMPXS region that instantiated this object.
"""
_ORDERED_PRIMARY_XS = ("absorption", "total", "removal", "transport")
def __init__(self, region, compxsIO, lib):
self._lib = lib
self._compxsIO = compxsIO
self._region = region
self._numGroups = self._getFileMetadata()["numGroups"]
self._fileMode = compxsIO.fileMode()
self._isReading = compxsIO.isReadingCompxs()
def _getRegionMetadata(self):
return self._region.metadata
def _getFileMetadata(self):
return self._lib.compxsMetadata
def rwRegionData(self):
"""Read/write the region specific information for this composition."""
self._rw3DRecord()
self._rw4DRecord()
def _rw3DRecord(self):
r"""Write the composition specifications block"""
with self._compxsIO.createRecord() as record:
self._getRegionMetadata()["chiFlag"] = record.rwInt(
self._getRegionMetadata()["chiFlag"]
)
self._getRegionMetadata()["numUpScatterGroups"] = record.rwList(
self._getRegionMetadata()["numUpScatterGroups"], "int", self._numGroups
)
self._getRegionMetadata()["numDownScatterGroups"] = record.rwList(
self._getRegionMetadata()["numDownScatterGroups"],
"int",
self._numGroups,
)
if self._getRegionMetadata()["numPrecursorFamilies"]:
self._getRegionMetadata()["numFamI"] = record.rwList(
self._getRegionMetadata()["numFamI"],
"int",
self._getRegionMetadata()["numPrecursorFamilies"],
)
def _rw4DRecord(self):
r"""Write the composition macroscopic cross sections"""
if self._isReading:
self._region.allocateXS(self._getFileMetadata()["numGroups"])
for group in range(self._getFileMetadata()["numGroups"]):
with self._compxsIO.createRecord() as record:
self._rwGroup4DRecord(record, group, self._region.macros)
if self._isReading:
self._region.makeScatteringMatrices()
def _rwGroup4DRecord(self, record, group, macros):
self._rwPrimaryXS(record, group, macros)
self._rwScatteringMatrix(record, group, macros, 0)
for datum in REGIONXS_POWER_CONVERT_DIRECTIONAL_DIFF:
self._getRegionMetadata()[datum][group] = record.rwDouble(
self._getRegionMetadata()[datum][group]
)
if self._getRegionMetadata()["numPrecursorFamilies"]:
self._getRegionMetadata()["numPrecursorsProduced", group] = record.rwList(
self._getRegionMetadata()["numPrecursorsProduced", group],
"int",
self._getRegionMetadata()["numPrecursorFamilies"],
)
macros.n2n[group] = record.rwDouble(macros.n2n[group])
for higherOrder in range(1, self._getFileMetadata()["maxScatteringOrder"] + 1):
self._rwScatteringMatrix(record, group, macros, higherOrder)
def _rwPrimaryXS(self, record, group, macros):
for xs in self._ORDERED_PRIMARY_XS:
macros[xs][group] = record.rwDouble(macros[xs][group])
if self._getRegionMetadata()["chiFlag"]:
macros["fission"][group] = record.rwDouble(macros["fission"][group])
macros["nuSigF"][group] = record.rwDouble(macros["nuSigF"][group])
macros["chi"][group] = record.rwList(
macros["chi"][group], "double", self._getRegionMetadata()["chiFlag"]
)
def _rwScatteringMatrix(self, record, group, macros, order):
numUpScatter = self._getRegionMetadata()["numUpScatterGroups"][group]
numDownScatter = self._getRegionMetadata()["numDownScatterGroups"][group]
sparseMat = macros.higherOrderScatter[order] if order else macros.totalScatter
dataj = (
None
if self._isReading
else _flattenScatteringVector(
sparseMat[:, group], group, numUpScatter, numDownScatter
)
)
dataj = record.rwList(dataj, "double", numUpScatter + 1 + numDownScatter)
indicesj = list(
reversed(range(group - numDownScatter, group + numUpScatter + 1))
)
if self._isReading:
sparseMat.addColumnData(dataj, indicesj)
class _CompxsScatterMatrix:
"""When reading COMPXS scattering blocks, store the data here and then reconstruct after."""
def __init__(self, shape):
self.data = []
self.indices = []
self.indptr = [0]
self.shape = shape
def addColumnData(self, dataj, indicesj):
self.data.extend(dataj)
self.indices.extend(indicesj)
self.indptr.append(len(dataj) + self.indptr[-1])
def makeSparse(self, sparseFunc=csc_matrix):
self.data = numpy.array(self.data, dtype="d")
self.indices = numpy.array(self.indices, dtype="d")
self.indptr = numpy.array(self.indptr, dtype="d")
return sparseFunc((self.data, self.indices, self.indptr), shape=self.shape)
[docs]class CompxsRegion:
"""
Class for creating/tracking homogenized region information.
Notes
-----
Region objects are created from reading COMPXS files through
:py:meth:`~_CompxsIO.readWrite` and connected to the resulting library,
similar to instances of :py:class:`~armi.nuclearDataIO.xsNuclides.XSNuclide`. This allows instances
of :py:class:`~armi.nuclearDataIO.xsLibraries.CompxsLibrary` to read from and write to ``COMPXS`` files,
access region information by name, and plot macroscopic cross sections from the homogenized regions.
The main attributes for an instance of `Region` are the macroscopic cross sections,
``macros``, and the metadata. The metadata deals primarily with delayed neutron information
and use of the ``fileWideChi``, if that option is set.
See Also
--------
armi.nuclearDataIO.xsNuclides.XSNuclide
Examples
--------
>>> lib = compxs.readBinary('COMPXS')
>>> lib.regions
<Region REG00>
<Region REG01>
<Region REG02>
...
<Region RegNN>
>>> r0 = lib.regions[0]
>>> r10 = lib.regions[10]
>>> r0.isFissile
False
>>> r10.isFissile
True
>>> r10.macros.fission
array([0.01147095, 0.01006284, 0.0065597, 0.00660079, 0.005587,
...
0.08920149, 0.13035864, 0.16192732]
"""
_primaryXS = ("absorption", "total", "removal", "transport", "n2n")
def __init__(self, lib, regionNumber):
self.container = lib
lib[regionNumber] = self
self.regionNumber = regionNumber
self.macros = XSCollection(parent=self)
self.metadata = self._getMetadata()
def __repr__(self):
return "<{} {}>".format(self.__class__.__name__, self.regionNumber)
def _getFileMetadata(self):
return self.container.compxsMetadata
def _getMetadata(self):
specs = RegionXSMetadata()
chiFlag = specs["fileWideChiFlag"] = self._getFileMetadata()["fileWideChiFlag"]
if chiFlag:
self.macros.chi = specs["fileWideChi"] = self._getFileMetadata()[
"fileWideChi"
]
compFamiliesWithPrecursors = self._getFileMetadata()[
"compFamiliesWithPrecursors"
]
if compFamiliesWithPrecursors is not None and compFamiliesWithPrecursors.size:
specs["numPrecursorFamilies"] = compFamiliesWithPrecursors[
self.regionNumber
]
else:
specs["numPrecursorFamilies"] = 0
return specs
@property
def isFissile(self):
return self.macros.fission is not None
[docs] def allocateXS(self, numGroups):
r"""
Allocate the cross section arrays.
When reading in the cross sections from a COMPXS file, the cross sections are read
for each energy group, i.e. ..math::
\Sigma_{a,1},\Sigma_{t,1},\Sigma_{rem,1}, \cdots,
\Sigma_{a,2},\Sigma_{t,2},\Sigma_{rem,2}, \cdots,
\Sigma_{a,G},\Sigma_{t,G{,\Sigma_{rem,G}
Since the cross sections can not be read in with a single read command, the
arrays are allocated here to be populated later.
Scattering matrices are read in as columns of a sparse scattering matrix and
reconstructed after all energy groups have been read in.
See Also
--------
:py:meth:`makeScatteringMatrices`
"""
for xs in self._primaryXS:
self.macros[xs] = numpy.zeros(numGroups)
self.macros.totalScatter = _CompxsScatterMatrix((numGroups, numGroups))
if self.metadata["chiFlag"]:
self.macros.fission = numpy.zeros(numGroups)
self.macros.nuSigF = numpy.zeros(numGroups)
self.macros.chi = numpy.zeros((numGroups, self.metadata["chiFlag"]))
if self._getFileMetadata()["maxScatteringOrder"]:
for scatterOrder in range(
1, self._getFileMetadata()["maxScatteringOrder"] + 1
):
self.macros.higherOrderScatter[scatterOrder] = _CompxsScatterMatrix(
(numGroups, numGroups)
)
for datum in REGIONXS_POWER_CONVERT_DIRECTIONAL_DIFF:
self.metadata[datum] = (
numpy.zeros(numGroups) if "Additive" in datum else numpy.ones(numGroups)
).tolist()
[docs] def makeScatteringMatrices(self):
r"""
Create the sparse scattering matrix from components.
The scattering matrix :math:`S_{i,j}=\Sigma_{s,i\rightarrow j}` is read in
from the COMPXS as segments on each column in three parts: ..math::
XSCATU_J = \lbrace S_{g', J}\vert g'=J+NUP(J), J+NUP(J)-1, cdots, J+1\rbrace
XSCATJ_J = S_{J,J}
XSCATD_J = \lbrace S_{g', J}\vert g'=J-1, J-2, \cdots, J_NDN(J) \rbrace
where :math:`NUP(J)` and :math:`NDN(J)` are the number of group that upscatter and
downscatter into energy group :math:`J`
See Also
--------
:py:class:`scipy.sparse.csc_matrix`
"""
self.macros.totalScatter = self.macros.totalScatter.makeSparse()
self.macros.totalScatter.eliminate_zeros() # pylint: disable=no-member
if self._getFileMetadata()["maxScatteringOrder"]:
for sctOrdr, sctObj in self.macros.higherOrderScatter.items():
self.macros.higherOrderScatter[sctOrdr] = sctObj.makeSparse()
self.macros.higherOrderScatter[sctOrdr].eliminate_zeros()
[docs] def getXS(self, interaction):
"""
Get the macroscopic cross sections for a specific interaction.
See Also
--------
:py:meth:`armi.nucDirectory.XSNuclide.getXS`
"""
return self.macros[interaction]
[docs] def merge(self, other):
"""Merge attributes of two homogenized Regions."""
self.metadata = self.metadata.merge(
other.metadata, self, other, "COMPXS", OSError
)
self.macros.merge(other.macros)