armi.materials.material module

Base Material classes.

All temperatures are in K, but Tc can be specified and the functions will convert for you.

Warning

ARMI uses these objects for all material properties. Under the hood, A system called MAT_PROPS is in charge of several material properties. It is a more industrial-strength material property system that is currently a TerraPower proprietary system. You will see references to it in this module.

class armi.materials.material.Material

Bases: armi.reactor.composites.Leaf

A material is made up of elements or isotopes. It has bulk properties like mass density.

pDefs = <armi.reactor.parameters.parameterDefinitions.ParameterDefinitionCollection object>

State parameter definitions

DATA_SOURCE = 'ARMI'

Indication of where the material is loaded from (may be plugin name)

name = 'Material'

references = {}

The literature references.

enrichedNuclide = None

Name of enriched nuclide to be interpreted by enrichment modification methods

correctDensityAfterApplyInputParams = True

modelConst = {}

Constants that may be used in intepolation functions for property lookups

thermalScatteringLaws = ()

A tuple of ThermalScattering instances with information about thermal scattering.

duplicate()

copy without needing a deepcopy.

linearExpansion(Tk: float = None, Tc: float = None) → float

the instantaneous linear expansion coefficient (dL/L)/dT

This is used for reactivity coefficients, etc. but will not affect density or dimensions.

See also

linearExpansionPercent()

average linear thermal expansion to affect dimensions and density

linearExpansionPercent(Tk: float = None, Tc: float = None) → float

Average thermal expansion dL/L. Used for computing hot dimensions and density.

Defaults to 0.0 for materials that don’t expand.

Parameters

• Tk (float) – temperature in (K)

• Tc (float) – Temperature in (C)

Returns

Return type

dLL(T) in % m/m/K

See also

linearExpansion()

handle instantaneous thermal expansion coefficients

linearExpansionFactor(Tc: float, T0: float) → float

Return a dL/L factor relative to T0 instead of to the material-dependent reference temperature. This factor dL/Lc is a ratio and will be used in dimensions through the formula:

dim = dim0*(1+dLL).

If there is no dLL, it should return 0.0

calculate thermal expansion based on dL/L0, which is dependent on the mat-dep ref temp.:

L(T) = L0(1+dL/L0)
(Lh-Lc)/L0 = dL/L0(Th) - dL/L0(Tc)
(Lh-Lc)/Lc = (Lh-Lc)/L0 * L0/Lc = (dL/L0(Th)-dL/L0(Tc)/L0 / (dL/L0(Tc)+1.0)

Parameters

• Tc (float) – Current (hot) temperature in C

• T0 (float) – Cold temperature in C

Returns

dL/L_fromCold – The average thermal expansion between T_current and T0

Return type

float

See also

linearExpansionPercent(), components.Component.getThermalExpansionFactor()

getThermalExpansionDensityReduction(prevTempInC: float, newTempInC: float) → float

Return the factor required to update thermal expansion going from temperatureInC to temperatureInCNew.

setDefaultMassFracs()

mass fractions

setMassFrac(nucName: str, massFrac: float) → None

Adjust the composition of this object so the mass fraction of nucName is val.

See also

setMassFracs()

efficiently set multiple mass fractions at the same time.

applyInputParams()

Apply material-specific material input parameters.

adjustMassEnrichment(massEnrichment: float) → None

Adjust the enrichment of the material.

See also

adjustMassFrac()

adjustMassFrac(nuclideName: str, massFraction: float) → None

Change the mass fraction of the specified nuclide.

This adjusts the mass fraction of a specified nuclide relative to other nuclides of the same element. If there are no other nuclides within the element, then it is enriched relative to the entire material. For example, enriching U235 in UZr would enrich U235 relative to U238 and other naturally occurring uranium isotopes. Likewise, enriching ZR in UZr would enrich ZR relative to uranium.

The method maintains a constant number of atoms, and adjusts refDens accordingly.

Parameters

• nuclideName (str) – Name of nuclide to enrich.

• massFraction (float) – New mass fraction to achieve.

volumetricExpansion(Tk=None, Tc=None)

getTemperatureAtDensity(targetDensity: float, temperatureGuessInC: float) → float

Get the temperature at which the perturbed density occurs.

property liquidPorosity

property gasPorosity

density(Tk: float = None, Tc: float = None) → float

Return density that preserves mass when thermally expanded in 2D.

Warning

This density will not agree with the component density since this method only expands in 2 dimensions. The component has been manually expanded axially with the manually entered block hot height. The density returned by this should be a factor of 1 + dLL higher than the density on the component. density3 should be in agreement at both cold and hot temperatures as long as the block height is correct for the specified temperature. In the case of Fluids, density and density3 are the same as density is not driven by linear expansion, but rather an exilicit density function dependent on Temperature. linearExpansionPercent is zero for a fluid.

See also

armi.materials.density3()

component density should be in agreement with this density

armi.reactor.blueprints._applyBlockDesign()

2D expansion and axial density reduction occurs here.

densityKgM3(Tk: float = None, Tc: float = None) → float

Return density that preserves mass when thermally expanded in 2D in units of kg/m^3

See also

armi.materials.density()

Arguments are forwarded to the g/cc version

density3(Tk: float = None, Tc: float = None) → float

Return density that preserves mass when thermally expanded in 3D.

Notes

Since refDens is specified at the material-dep reference case, we don’t need to specify the reference temperature. It is already consistent with linearExpansion Percent. - p*(dp/p(T) + 1) =p*( p + dp(T) )/p = p + dp(T) = p(T) - dp/p = (1-(1 + dL/L)**3)/(1 + dL/L)**3

density3KgM3(Tk: float = None, Tc: float = None) → float

Return density that preserves mass when thermally expanded in 3D in units of kg/m^3.

See also

armi.materials.density3()

Arguments are forwarded to the g/cc version

getCorrosionRate(Tk: float = None, Tc: float = None) → float

given a temperature, get the corrosion rate of the material

getLifeMetalCorrelation(days: float, Tk: float) → float

life-metal correlation calculates the wastage of the material due to fission products.

getReverseLifeMetalCorrelation(thicknessFCCIWastageMicrons: float, Tk: float) → float

Life metal correlation reverse lookup. Knowing wastage and Temperature determine the effective time at that temperature.

getLifeMetalConservativeFcciCoeff(Tk: float) → float

Return the coefficient to be used in the LIFE-METAL correlation

yieldStrength(Tk: float = None, Tc: float = None) → float

returns yield strength at given T in MPa

thermalConductivity(Tk: float = None, Tc: float = None) → float

thermal conductivity in given T in K

getProperty(propName: str, Tk: float = None, Tc: float = None, **kwargs) → float

gets properties in a way that caches them.

getMassFrac(nucName=None, elementSymbol=None, nucList=None, normalized=True, expandFissionProducts=False)

Return mass fraction of nucName.

Parameters

• nucName (str, optional) – Nuclide name to return (‘ZR’,’PU239’,etc.)

• elementSymbol (str, optional) – Return mass fractions of all isotopes of this element (example: ‘Pu’, ‘U’)

• nucList (optional, list) – List of nuclides to sum up and return the total

• normalized (bool, optional) – Return the mass fraction such that the sum of all nuclides is sum to 1.0. Default True

Notes

self.p.massFrac are modified mass fractions that may not add up to 1.0 (for instance, after a axial expansion, the modified mass fracs will sum to less than one. The alternative is to put a multiplier on the density. They’re mathematically equivalent.

This function returns the normalized mass fraction (they will add to 1.0) as long as the mass fracs are modified only by get and setMassFrac

This is a performance-critical method as it is called millions of times in a typical ARMI run.

See also

setMassFrac(), getNDens()

clearMassFrac() → None

zero out all nuclide mass fractions.

removeNucMassFrac(nuc: str) → None

removeLumpedFissionProducts() → None

getMassFracCopy()

checkTempRange(minV, maxV, val, label='')

Checks if the given temperature (val) is between the minV and maxV temperature limits supplied. Label identifies what material type or element is being evaluated in the check.

Parameters

• maxV (minV,) – The minimum and maximum values that val is allowed to have.

• val (float) – The value to check whether it is between minV and maxV.

• label (str) – The name of the function or property that is being checked.

densityTimesHeatCapacity(Tk: float = None, Tc: float = None) → float

Return heat capacity * density at a temperature :param Tk: Temperature in Kelvin. :type Tk: float, optional :param Tc: Temperature in degrees Celsius. :type Tc: float, optional

Returns

rhoCP – Calculated value for the HT9 density* heat capacity unit (J/m^3-K)

Return type

float

getNuclides()

Determine which nuclides are present in this armi object.

Returns

List of nuclide names that exist in this

Return type

list

getTempChangeForDensityChange(Tc: float, densityFrac: float, quiet: bool = True) → float

Return a temperature difference for a given density perturbation.

heatCapacity(Tk=None, Tc=None)

paramCollectionType

alias of armi.reactor.parameters.parameterCollections.MaterialParameterCollection

class armi.materials.material.Fluid

Bases: armi.materials.material.Material

A material that fills its container. Could also be a gas.

name = 'Fluid'

getThermalExpansionDensityReduction(prevTempInC, newTempInC)

Return the factor required to update thermal expansion going from temperatureInC to temperatureInCNew.

linearExpansion(Tk=None, Tc=None)

for void, lets just not allow temperature changes to change dimensions since it is a liquid it will fill its space.

getTempChangeForDensityChange(Tc: float, densityFrac: float, quiet: bool = True) → float

Return a temperature difference for a given density perturbation.

paramCollectionType

alias of armi.reactor.parameters.parameterCollections.MaterialParameterCollection

density3(Tk=None, Tc=None)

Return the density at the specified temperature for 3D expansion.

Notes

for fluids, there is no such thing as 2 d expansion so density() is already 3D.

class armi.materials.material.FuelMaterial

Bases: armi.materials.material.Material

Material that is considered a nuclear fuel.

All this really does is enable the special class 1/class 2 isotopics input option.

paramCollectionType

alias of armi.reactor.parameters.parameterCollections.FuelMaterialParameterCollection

pDefs = <armi.reactor.parameters.parameterDefinitions.ParameterDefinitionCollection object>

applyInputParams(class1_custom_isotopics=None, class2_custom_isotopics=None, class1_wt_frac=None, customIsotopics=None)

Apply optional class 1/class 2 custom enrichment input.

Notes

This is often overridden to insert customized material modification parameters but then this parent should always be called at the end in case users want to use this style of custom input.

This is only applied to materials considered fuel so we don’t apply these kinds of parameters to coolants and structural material, which are often not parameterized with any kind of enrichment.

_applyIsotopicsMixFromCustomIsotopicsInput(customIsotopics)

Apply a Class 1/Class 2 mixture of custom isotopics at input.

Only adjust heavy metal.

This may also be needed for building charge assemblies during reprocessing, but will take input from the SFP rather than from the input external feeds.